The Maxibright Varidrive 600w Air-Cooled Goldstar grow light has four adjustable power output settings (250w, 400w, 600w and 660w boost) for continuous flexibility during the whole growing and flowering cycles. Utilise space in your grow room without compromising on performance. The Varidrive ballast runs both high pressure sodium and metal halide bulbs.
Although the 600w Varidrive ballast does not have the same enhanced features as a Maxibright 600w Pro Select ballast (RF Protection, Dynamic Frequency Control etc) it is constructed with safety and reliability features that will ensure peace of mind usage.
The Maxibright Goldstar reflector is available with either 125mm or 150mm spigots (125mm overall dimensions: 55cm x 47cm x 25cm – 150mm overall dimensions: 65cm x 57cm x 30cm) for connection to ducting/an in-line fan. It is a highly reflective aluminium reflector which provides a wide and uniform light output. The Goldstar offers easy access for fast lamp changes with a hinged cover incorporating safety retaining cables to ensure that the cover cannot be dropped while opening. Toughened safety glass is securely fitted in this reflector to ensure an air-tight seal. V-hooks are supplied for hanging the reflector. The Goldstar is fitted a 5mtr power cable and IEC connector to suit any power pack/ ballast.
The air-cooled Goldstar Varidrive light kit is supplied with the Sunmaster 600w Dual Spectrum high pressure sodium lamp to gain optimum results from your digital lighting package!
Tip: A HID (HPS/Metal Halide/CDM) bulb will drop approx. 30% of its lumen output within 12-14 months of continuous use. We recommend replacing every 3-6months for optimum plant growth and yield output!
1-2 x 125mm Goldstar Lights – 1x 125mm HP Rhino Single Speed Fan
1-2 x 150mm Goldstar Lights – 1x 150mm LP Rhino Single Speed Fan
2+ x 150mm Goldstar Lights – 1x 150mm HP Rhino Single Speed Fan
* PLEASE NOTE: We do not recommend dimming a 600w/400w/250w lamp down or up to a lower or higher setting. Please ensure that you are using the correct wattage lamp/bulb for the desired wattage setting on the Varidrive ballast. Always switch off your light, wait for your lamp to cool, remove and replace the lamp/bulb with one that matches the chosen dimmed wattage setting.