£158.50 to £161.99
The Maxibright Pro-Select 600w DigiLight Air-Cooled Coolshade is ideal for removing heat in the smallest of growing spaces. The Maxibright DigiLight ...More
The Maxibright Pro-Select 600w DigiLight Air-Cooled Coolshade is ideal for removing heat in the smallest of growing spaces.
The Maxibright DigiLight 600w 240v Pro Select Variable Ballast features include the super power mode which can give your lamps up to 10% extra power! Six variable power modes: 250w, 275w super, 400w, 440w super, 600w, 660w super.
Soft start technology which slowly starts your lamp up on a lower current which will improve the life of your lamps. Developed with new Surge Control® software, when multiple DigiLight Pro® Select power packs are started from the same power supply they will safely ignite your lamps one at a time to reduce electrical surges.
DigiLight Pro Select Power Pack limit the damage to your grow when something unexpected happens like a power cut or surge, fast lamp re-strike safely re-starts your lamp as fast as possible without having to wait for them to cool. They also have dynamic frequency control, domestic power supplies naturally fluctuate in voltage. Dynamic frequency control regulates the power pack output to your lamps for longer lamp life, efficient lamp output, and no flickering. The LED status Light can also help you find any fault the power pack has with the diagnostic feature.
The 120mm and 150mm Coolshade grow light reflectors are an air-tight, fully sealed clear glass tube with a lamp mounting bracket in its centre. It's perfect for removing the excess heat generated by HID grow lights without leaking unpleasant odours. Air is usually pulled (but can be pushed) over the lamp by adding an extractor fan to one side of the tube, the hot vented air is then expelled away from the grow room and plants. Coolshade reflectors are ideal for small grow tents or growing spaces. Multiple Coolshade's can be linked using a Rhino LP or HP fan. Contact us for the relevant size fan for your lighting system.
120mm Coolshade dimensions: 120mm x400mm (560mm incl ducting flanges) *Use 125mm ducting and fittings - cannot use 125mm Padded Collars.
150mm Coolshade dimensions: 150mm x400mm (560mm incl ducting flanges)
This grow light is supplied with the high lumen output Sunmaster 600w Dual Spectrum high-pressure sodium lamp to help you gain optimum results from your digital lighting package!
*Please note: We always recommend using the correct/matching wattage lamp to the desired wattage setting on the ballast. You will always obtain best PAR output results from matching the lamp to the ballast wattage I.e use a 250w HPS lamp for the 275w super setting. Please also note: Metal Halide lamps cannot be boosted to the higher wattage of a respective setting. We also do not recommend dimming a 600w HPS lamp down to the lower settings as this can cause lamp failure or at the very least an unbalanced spectrum output from the lamp.
For multiple 120mm Coolshade:
We recommend running up to 2x 250/400w lighting systems in a row using 2x 120mm Coolshades and a 125mm Rhino Single Speed fan.
For multiple 150mm Coolshade:
We recommend running up to 3x 600w lighting systems in a row using 3x 150mm Coolshades and a 150mm Rhino L1 Single Speed fan.